CruzPro D60
The D60 is a compact digital depth gauge. The D60 uses Digital Signal Processing (DSP) to reliably display water depth from 1.2 foot (0.4 Metre) to 1000+ feet (365 Metres). Depth can be displayed in feet, metres or fathoms. Variable display damping is provided.
The D60 has programmable shallow, deep and anchor drag alarms built-in and can display the depth in feet, metres or fathoms. A keel offset from -20.0 to +20.0 feet can be entered so the D60 shows the depth below the surface, below the keel or below the transducer.
The D60 uses Digital Signal Processing (DSP) to enable sensitivity never before found in such a low cost small sounder. The DSP also provides superior high speed rejection of false signals due to transducer slap (buffeting), surface turbulence, thermoclines, double bounce and is almost immune to other depth sounders and fishfinders operating near-by.
Five levels of backlighting can be selected for night-time viewing and all set-up constants are saved in a non-volatile memory.
Both through-hull and transom mount transducers are available separately for the D60.
Specifications
Operating Voltage:
9.5 - 16.0 VDC
Current Drain:
0.030 amps nominal
Operating Temperature:
32 to 122 deg F (0 to 50 C)
Display:
4 digit LCD, 5 levels of backlighting
Variable display damping
Data:
Depth 1.2 to 19.9 feet in tenths
and 20 - 1000+ feet full digits
or Metres, or Fathoms equivalent
Alarms:
Built-in 85 dB audible alarms
for shallow, deep and anchor drag
Keel Offset:
Adjustable -20.0 to +20.0 feet in tenths
Size:
2.5" dia X 4.1" deep (61mm x 104mm)
Mounting:
2-1/8" (55mm) round holeThis product was added to our catalog on Tuesday 27 January, 2004.
